Sign In | Join Free | My himfr.com |
|
Ask Lasest Price | |
Brand Name : | MDS |
Certification : | CE, ISO9001:2015 |
Price : | Please contact us |
Delivery Time : | 5~60 days |
Payment Terms : | T/T, L/C, Western Union, MoneyGram |
Supply Ability : | 20 sets per month |
Digester-Mounted Double Membrane Gas Holder
Brief introduction of digester-mounted double membrane gas holder
The MDS Double Membrane Gas Holder is a proven design to store
digester gas with low total cost of ownership. The storage system
is easier to install, has lower upfront capital costs and requires
lower operating capital when compared to other methods of gas
storage. The unique design allows for variable gas storage within
the inner membrane at constant pressure during gas production and
utilization, while the air inflated outer membrane provides gas
pressure and protection. The outer membrane is constructed of a
high tech cross woven fabric, coated with PVC and Ultraviolet (UV)
ray protection, which has proven to endure the weather elements. An
ultrasonic sensor is positioned at the center of the sphere to
monitor the volume of gas present.
This gives the operators full control of optimizing the utilization
of gas to feed generators and/or heating systems. Using the MDS
Double Membrane Gas Holder to store digester gas and eliminating or
reducing 'flaming' from the digester(s) can help your facility
reduce or completely eliminate the need for electric grid power
when generators and/or hot water boilers are incorporated into the
system/facility design.
Features and benefits of digester-mounted double membrane gas holder
Features | Benefits |
Self Support Membrane Fabric, with No Additional Supports or Anchorage | Lower Total Cost of Ownership, Ease of Installation |
PVC Coated and Ultraviolet (UV) Ray Protection | Reduced Maintenance, Long Service Life |
Storage Volumes Exceeding 200,000ft3 | Design Flexibility |
Redundant High Efficiency Air Blowers | Maximum Operational Uptime, Lower Operating Costs |
Access Manhole for Visual Inspection | Ease of Periodic Inspection and Maintenance |
Simple Anchorage Devices | Ease of Installation |
Pricing of digester-mounted double membrane gas holder
Pricing varies depending on capacity required, operating pressure
and gas production and utilization rates. Quotations are provided
within 48 hours of request when accompanied by minimum required
specification data.
Minimum specification data required in order to provide a quote:
1. Required Gas Storage Capacity (m³)
2. Operating Pressure (Kpa or mbar)
3. Gas Production & Utilization rates (m³/hr)
Type of digester-mounted double membrane gas holder
Shape: Conical
The membrane structure is put on the top of the tank that biogas
storage and output are in the whole structure. The whole structure
presents to be cone-shaped.
Advantages:
The top tap is cone-shaped, which is good for the melt of snow, and suitable for the raining area.
Costs less than Mounted on Surface of land.
This system can be both regarded as top tap of the tank and the storage system. This saves space and money.
This is suitable for those projects of daily biogas-output at the middle or below.
Save space.
![]() |